Model G320X

Geckodrive G320X Brush DC Servo Motor Driver

Picture of Geckodrive G320X Brush DC Servo Motor Driver.
Click on image for larger view

• Built in step pulse multiplier
• Current mode or voltage mode servo
• Stall torque time limit
• Four settable following error limits
• Encoder fail detect
• Short circuit protection
• Dynamic motor braking during fault condition
• STEP and DIRECTION COMMON can be either +5VDC or GND
• PID trimpots with settable integral coefficient
• IN-POSITION, WARN, FAULT and POWER indicator LEDs
• STEP and DIRECTION is +3.3VDC and +5VDC compatible at 6mA
• 20A 80VDC continuous operating maximum
• PID loop closed internally
• Quadrature encoder inputs of <1V (Logic 0) and >4V (Logic 1)
• +5VDC 50mA onboard encoder supply
• Opto-isolated STEP and DIRECTION inputs
• 20kHz PWM frequency
• Settable current limit from 0A to 20A

Geckodrive G320X web page (can download the manual from here)

Click here for an application note on using the PMDX-125 or PMDX-126 to interface with the ERR/RES pins on Gecko servo drivers.

The G320X is priced at $115.00 each.

Currently out of stock.

For International customers or for alternate payment options - click HERE