Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Firechief

Pages: [1] 2
1
General Discussion / Setting Z 0
« on: January 12, 2018, 10:43:52 PM »
I’m using mach4 and pmdx 424 board. When I probe down with a G31 to touch the set plate, when it touch the plate it will jump maybe .010. Not sure way this is happening. It does not do it all the time 1 out of 3 times. It will continue with the rest of the routine but the dro in mach4 will be off.
Any help would be great.


2
Show and Tell / Re: CNC Router build...
« on: February 27, 2017, 04:25:00 PM »
Belt drive all mocked up on the machine and starting to look as it should.. I hope.

Please any input would be great.

Enjoy
firechief

3
Show and Tell / Re: CNC Router build...
« on: February 27, 2017, 04:22:44 PM »
Started the belt drive. Cutting, fitting and welded all up.

4
Show and Tell / Re: CNC Router build...
« on: February 27, 2017, 04:20:53 PM »
Adding the z slider to the main Y cart.. and making a bracket for the limit switch for the Z movement.

5
Show and Tell / Re: CNC Router build...
« on: February 27, 2017, 04:17:50 PM »
Got some work done over the weekend.. This is the Z slide starting to come together.

6
Show and Tell / Re: CNC Router build...
« on: February 21, 2017, 03:34:02 PM »
This is it all setting together. Starting to look right. I beams still need to be cut off and welded down to the table. I will then make and mount the V rails then things should start to move around. The main control box is mounted on the left side and all cable chain supports are done as well. Let me know what you think or option you mat have, enjoy the pics.

firechief

7
Show and Tell / Re: CNC Router build...
« on: February 21, 2017, 03:28:51 PM »
More Z slider

8
Show and Tell / Re: CNC Router build...
« on: February 21, 2017, 03:27:30 PM »
This is the Z slider getting worked on.

9
Show and Tell / Re: CNC Router build...
« on: February 21, 2017, 03:25:51 PM »
All setting together, Starting to look like a something I hope.

10
Show and Tell / Re: CNC Router build...
« on: February 21, 2017, 03:23:49 PM »
This is the Y cart.

11
Show and Tell / Re: CNC Router build...
« on: February 21, 2017, 03:22:28 PM »
Got some work done this weekend enjoy.

12
Show and Tell / Re: CNC Router build...
« on: February 13, 2017, 11:42:43 AM »
Time to make some mount for my control box. Also need to add the two main I beams to the top of the table were the gantry will run on. I will post more as pics as I get it done.

All comets are welcome.

Tim

13
Show and Tell / Re: CNC Router build...
« on: February 13, 2017, 11:31:27 AM »
Man in the pics is a good friend Danny. He is a great paint and body man as well.
More pics of the base table. Not all done, but all tack up. Need to add cross bracing and mounting tabs ect...

Hope you like it.

Tim

14
Show and Tell / CNC Router build...
« on: February 13, 2017, 11:26:24 AM »
Just posting some information on my router build that I,m working on. Please let me know what you think good or bad.


15
General Discussion / Re: CNC Router Table build, Mach4
« on: February 13, 2017, 11:14:18 AM »
Some more pics. Man in pics is a great friend (Danny) and is one of the best paint and body worker I know.

Please let me know what you think, Good or bad.

Tim

Pages: [1] 2