Author Topic: G31  (Read 5129 times)

RhoTu

  • Posts: 7
    • View Profile
G31
« on: March 15, 2017, 01:36:01 PM »
Using Mach4 turn, build 3233 and Smart Bob with plugin 49.237 & firmware 56.203

I have posted on the mach4 forum since I don't know whether this is hardware or software related

http://www.machsupport.com/forum/index.php/topic,34458.0.html

Can anyone answer the questions or confirm that they experience the same behavior?

Thanks

RT

Steve Stallings

  • Administrator
  • Posts: 527
  • www.PMDX.com/Images/Avatar120.jpg
    • View Profile
Re: G31
« Reply #1 on: April 02, 2017, 06:48:36 PM »
This topic has resulted in multiple threads on the MachSupport.com forum for Mach4.
Most of the discussion appeared to be about how to operate probing, but I am not
sure if your issue still exists. If it does, please:

1) send us an example of G-code that will demonstrate it
2) send us a packaged profile from your system
3) if possible send us debug logs captured while running your code when the problem
    occurs
4) make notes about actual ending locations versus expected locations

Instructions for running with debug logging enabled are here:

http://faq.pmdx.com/content/2/3/en/how-to-capture-a-debug-log-file-and-send-to-pmdx.html



Steve Stallings
www.PMDX.com

RhoTu

  • Posts: 7
    • View Profile
Re: G31
« Reply #2 on: April 02, 2017, 08:45:27 PM »
Ticket opened with Rob at newfangled,  log files sent, screen grab of mdi sent, youtube e video uploaded

https://youtu.be/gwMqFhfHdrc. G31 Creep Mach4 pmdx 411

Out of town until end of week. No access to computer.

Mdi entry

G1 x.3 f.5
G31 x0

Run from cycle start 5 times.  Ending error 0.0396

Repeatable

RhoTu

  • Posts: 7
    • View Profile
Re: G31
« Reply #3 on: April 11, 2017, 04:35:52 PM »
I believe you now have everything requested.

Steve Stallings

  • Administrator
  • Posts: 527
  • www.PMDX.com/Images/Avatar120.jpg
    • View Profile
Re: G31
« Reply #4 on: April 11, 2017, 09:51:06 PM »
We think we know what is happening and are trying to unwind the logic
in our plugin to avoid the problem. We may yet ask for a more detailed
log file from our plugin if we cannot prove that we have the quirk that
we saw fixed. Hang in there, this problem is not being ignored.
Steve Stallings
www.PMDX.com

RhoTu

  • Posts: 7
    • View Profile
Re: G31
« Reply #5 on: April 20, 2017, 12:21:32 PM »
Still hanging in there but am starting to feel like I'm just twisting in the wind.

RhoTu

  • Posts: 7
    • View Profile
Re: G31
« Reply #6 on: April 27, 2017, 06:30:33 PM »
New plugin, version 0.51.252, fixes this problem. thanks.

Steve Stallings

  • Administrator
  • Posts: 527
  • www.PMDX.com/Images/Avatar120.jpg
    • View Profile
Re: G31
« Reply #7 on: May 14, 2017, 09:05:05 PM »
That is great to hear.

Thanks for your patience.
Steve Stallings
www.PMDX.com