PMDX Forum

General Category => SmartBOB controllers and dedicated accessories => Topic started by: ScottC on June 02, 2016, 11:45:21 AM

Title: How to Set Common Signal to 5 volts
Post by: ScottC on June 02, 2016, 11:45:21 AM

How do i set the common signal on my PMDX-424 to 5 Volts for my stepper driver i have selected.  I do not see this in any of the documentation i have seen so far.

Thanks

Scott

Title: Re: How to Set Common Signal to 5 volts
Post by: Bob at PMDX on June 02, 2016, 11:51:14 AM

Answered here: http://www.pmdx.com/PMDX-Forums/index.php?topic=278.msg1133#msg1133