PMDX Forum

General Category => General Discussion => Topic started by: GrayHackleRods on October 24, 2017, 03:32:18 PM

Title: LPT to USB
Post by: GrayHackleRods on October 24, 2017, 03:32:18 PM

I have a Sherline 2000 that I'm converting to CNC. Plan on purchasing the PMDX-340 and NEMA 23 steppers from Stepperonline. I will probably be using an existing computer I have so will need to have a LPT to USB. my question is will this (http://www.discountcampus.com/cgi-bin/webc.exe/store/st_prod.html?p_prodid=19450) work?

Title: Re: LPT to USB
Post by: Steve Stallings on October 24, 2017, 07:31:29 PM

Yes, the device from Discount Campus will work with the PMDX-340, but you
should be aware that the PMDX-411 is less expensive. Mach4 is required to
use the PMDX-411, and we offer a bundle discount when purchased together.

http://www.pmdx.com/PMDX-411