PMDX Forum
General Category => Parallel Port breakout boards, motherboards, and dedicated accessories => Topic started by: Josh113 on June 28, 2018, 03:01:55 PM
-
I have a bridgeport series1 cnc with the original stepper Motors and a pmdx 126 and 134 running 4 g203v with linuxcnc on it and cant find the pin out for the parallel port to get it to canfigur dose anyone know how to find the pinout and parameters to get it working again
Thanks
-
See page 9 of the manual here:
http://www.pmdx.com/Doc/PMDX-134_Manual_12.pdf