PMDX Forum

General Category => Parallel Port breakout boards, motherboards, and dedicated accessories => Topic started by: Mike Abbott on November 13, 2016, 09:16:42 PM

Title: Mach4 and probing
Post by: Mike Abbott on November 13, 2016, 09:16:42 PM

I've got a probe setup that does x,y,z probing and connected it up to a pmdx 424.  On the machine diagnostics I see the probe signal working just fine but when I go to use it I periodically (more often that not) get a message saying "Can't transition from MDI RUNNING to STOP".  The probing I'm using is from the Mach4 4.2.0.3124 of the touch menu on the main screen form.  I figured that since the 424 is involved in probing I'd ask here first.

Mike

Title: Re: Mach4 and probing
Post by: Bob at PMDX on November 13, 2016, 10:55:03 PM

Duplicate post - see responses here:
http://www.pmdx.com/PMDX-Forums/index.php?topic=356.0