PMDX Forum
General Category => SmartBOB controllers and dedicated accessories => Topic started by: Bob at PMDX on March 10, 2015, 10:03:50 AM
-
*******************************************************************************
This page is obsolete and maintained here for historical purposes.
Please visit the new PMDX FAQ site here:
http://faq.pmdx.com/
The links below still work, and will bring you to the now obsolete individual FAQ pages.
Each of the below FAQ pages now has a link to the corresponding FAQ on the new FAQ site.
*******************************************************************************
This message will collect links to messages that describe activities that we frequently use (or ask our customers to use) when troubleshooting Mach4/SmartBOB behaviors.
(1) What should you tell us when you report a problem?
http://www.pmdx.com/PMDX-Forums/index.php?topic=100.0
(2) How do I determine the Mach4 build and/or SmartBOB plug-in or firmware version?
http://www.pmdx.com/PMDX-Forums/index.php?topic=73.0
(3) Where do I find the "machine.ini" file (aka "Mach4 configuration file")?
http://www.pmdx.com/PMDX-Forums/index.php?topic=74.0
(4) How to I capture and send a SmartBOB plug-in debug log to PMDX?
http://www.pmdx.com/PMDX-Forums/index.php?topic=97.0
(5) How to troubleshoot a "did not find a valid PMDX-SmartBOB device" error?
http://www.pmdx.com/PMDX-Forums/index.php?topic=223.0
-
As of build 2580 Mach4 now has a function to capture the
machine configuration and profile into a zip file. This is
useful when there are doubts about how the machine is
configured.
This function is under the Help > Support dialog. If you
use it, be sure to edit the email address to send it to
PMDX instead of MachSupport.