PMDX Forum

General Category => Parallel Port breakout boards, motherboards, and dedicated accessories => Topic started by: TonyC on April 25, 2018, 08:34:09 PM

Title: PMDX-411 and a Xylotex P&P_SYS_KIT
Post by: TonyC on April 25, 2018, 08:34:09 PM

Has anyone used a PMDX-411 with Mach4 and a Xylotex P&P_SYS_KIT? Any compatibility issues? I'm a newbie and any input would be much appreciated.

Thanks!

Title: Re: PMDX-411 and a Xylotex P&P_SYS_KIT
Post by: 12strings on May 03, 2018, 01:39:49 PM

No first-hand experience.  But as long as the Xylotex device pretends to be PC parallel port compatible the PMDX-411 should work fine.

Title: Re: PMDX-411 and a Xylotex P&P_SYS_KIT
Post by: TonyC on May 06, 2018, 09:45:38 AM

Thanks 12strings!