PMDX Forum

General Category => Parallel Port breakout boards, motherboards, and dedicated accessories => Topic started by: Josh113 on June 28, 2018, 03:01:55 PM

Title: Bridgeport cnc with pmdx 126 and 134
Post by: Josh113 on June 28, 2018, 03:01:55 PM

I have a bridgeport series1 cnc with the original stepper Motors and a pmdx 126 and 134 running 4 g203v with linuxcnc on it and cant find the pin out for the parallel port to get it to canfigur dose anyone know how to find the pinout and parameters to get it working again

Thanks

Title: Re: Bridgeport cnc with pmdx 126 and 134
Post by: Steve Stallings on July 08, 2018, 01:39:32 PM

See page 9 of the manual here:

http://www.pmdx.com/Doc/PMDX-134_Manual_12.pdf