« previous next »
Pages: 1 [2]

Author Topic: Just purchased PDMX and other items  (Read 11196 times)

SolarImages

  • Posts: 11
    • View Profile
Re: Just purchased PDMX and other items
« Reply #15 on: July 04, 2015, 10:09:40 AM »
I am eventually going to add a spindle that I will want to control speed. As of right now I only want on off of the router.
Logged

SolarImages

  • Posts: 11
    • View Profile
Re: Just purchased PDMX and other items
« Reply #16 on: September 18, 2015, 02:19:09 PM »
Right now i just want to control the Router off and on. Later i hope to add a real Spindle and VFD. from Ungra.
Logged

Bob at PMDX

  • Administrator
  • Posts: 368
    • View Profile
    • PMDX
Re: Just purchased PDMX and other items
« Reply #17 on: September 18, 2015, 02:39:25 PM »
The diagram you sent previously (on June 29th) with the change that I suggested on July 2nd (moving the 120VAC to the PMDX-107's "Fwd/Run" terminal) should make this happen.

If you need help configuring Mach3 to use the PMDX-107, see our application note AN002 (PWM Spindle Speed with Mach3, SmoothStepper, PMDX-125 or PMDX-126 and PMDX-106 or PMDX-107) here: http://pmdx.com/AppNotes

If you have any other questions, let us know.

Bob
Logged
Engineering Hell: Everything's right and nothing works.
Bob's Corollary: If everything's right and nothing works, double check your assumptions.
Pages: 1 [2]
« previous next »