PMDX Forum
General Category => SmartBOB controllers and dedicated accessories => Topic started by: Thomasm on April 19, 2018, 09:54:01 PM
-
Hi all new here I have a 6040 110 v chinese cnc licenced mock 4 . Having a little trouble transfering wireing.i think I need a 24v power its a 4 axis the wires hooked up are axis can somebody make me a drawing for hook up. Thanks hope I got the right board
Let me know what I have to do please pic attached
-
OK then I figured it out. so if you have a chinese cnc. Use mock 4 with a pmdx 414 breakout board and a daughter board for the spindle works perfect .