PMDX Forum
General Category => SmartBOB controllers and dedicated accessories => Topic started by: Blacksmith on March 08, 2015, 08:17:13 AM
-
Has anybody seen this problem before ?
http://youtu.be/6Ucau0pPxcI
Transaction ID: 5L7653742B104691B
-
No, I have not seen such a problem before, but I would need better
information to try to understand it. Please try to provide the following:
Mach4 build number
Plug-in version number
A copy of your "Machine.ini" from your Mach4HobbyProfilesmy-profile-name folder
A copy of your G-code program
If you prefer not to post these items on the forum, you can email them directly to PMDX.
-
thanks for quick response,
mach4 build 2259
plug in 0.17.86
files:
https://www.dropbox.com/sh/kscdhziod4wz8ai/AACCDaBZPaEsd40uTQOz6t2xa?dl=0
can the usb cable be the problem ? so far I have only tested with old printer usb cables .
-
OK, not the symptoms I expected, but there are issues with build 2259
and our plug-in. The screw mapping "enhancement" caused problems
with the way Mach4 provided motion data. Please drop back to build
2238 or 2247 until we or Mach4 fix this problem.
http://www.pmdx.com/PMDX-Forums/index.php?topic=68.0
-
thank you , 2238 is working