PMDX Forum
Forum -- Admin, Rules, Announcements => Announcements => Topic started by: Steve Stallings on April 28, 2017, 04:45:04 PM
-
The PMDX-414 is refresh of our SmartBOB product line that combines
the encoder support of the PMDX-410 with the panel mount system
of the PMDX-412 into a single new design so you no longer have to
choose between these two features when selecting a low cost board.
The PMDX-414 has replaced both the PMDX-410 and the PMDX-412
in our product line and can functionally replace both products. The
older products will continued to be supported by our Mach4 plug-ins
because they share the same design architecture as all of the
SmartBOB family.
You can view the PMDX-414 product page here:
http://www.pmdx.com/PMDX-414