PMDX Forum
General Category => Cables, connectors, switches, contactors, sensors and other items => Topic started by: Toddler on July 21, 2018, 09:08:08 PM
-
I have a 3 Axis router with 2 motors on X, 1 on Y, 1 on Z. it is a older MultiCam. and has 1 proximity sensor per motor. attached is a picture of where they come together in the router carriage unit. i have mounted a 24v power supply. reading other 4wire diagrams i'm not sure where to start. open to any suggestion.
Also does anyone know approximately how many amps these would draw. my current supply is too large (dimensional)