Messages

1

SmartBOB controllers and dedicated accessories / Re: The pc can’t recognize the PMDX-424

« on: September 06, 2018, 08:29:40 PM »

I did it, but still unrecognized the PMDX-424!

2

SmartBOB controllers and dedicated accessories / Re: The pc can’t recognize the PMDX-424

« on: September 05, 2018, 01:25:35 PM »

I did it, I reinstalled like 3 or 4 times l,

the yellow triangle where next to  STMicroelectronics Virtual COM Port under Ports (COM & LPT)

I ran Win7 64–bit

I downloaded every driver installer and tried all od them

No, I didn’t get any dialog windows

3

SmartBOB controllers and dedicated accessories / The pc can’t recognize the PMDX-424

« on: September 04, 2018, 11:34:22 AM »

Hello, my company bought an PMDX-424 because we have an YCM-40 cnc miller, I do everything that says quick start manual but when I try to do the step 2.8 i have a problem with the drivers because the computer that I use don’t recognize the PMDX-424 (and I try with 5 different pc, all them have windows 7) the computer don't show me any messages that is a device connected and well after that i go to the forums and found that link https://faq.pmdx.com/content/2/1/en/troubleshooting-did-not-find-a-valid-pmdx_smartbob-device-errors.html i do everything that say there but still happens anything, when i see if the drivers had been installed the drivers have a yellow triangle in the description says: this device can’t star (code 10), what can i do now?

Cristian Matute