1
SmartBOB controllers and dedicated accessories / Re: PMDX: No synchronized position from motion planner
« on: July 02, 2020, 09:55:02 PM »
i had the same issue. wound up getting a uc100 and it works great
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
SmartBOB controllers and dedicated accessories / Re: PMDX-424 Probing Error, Hangs Mach4
« on: July 02, 2020, 09:52:17 PM »
uc 100 will fix it. i had the same issue.
3
SmartBOB controllers and dedicated accessories / Re: No synchronized position from motion planner
« on: July 02, 2020, 09:51:18 PM »
me again..... uc100 works great right out of the box.... im not even going to bother trying to get debug files. what are my chances of returning this thing? or should i burn it on youtube? hope to hear from you guys this month.
4
SmartBOB controllers and dedicated accessories / Re: No synchronized position from motion planner
« on: June 29, 2020, 09:43:56 PM »
great....
ill try to get all of the files emailed out this weekend. i ordered an uc100 to see if that works so ill be switching computers back out later on in the week (currently running linux desktop). i believe i already sent you guys the debug files also. do you have a return policy because i have to have a probe and this absolutely does not work. do you guys have any idea when an update will be available? i purchased the 411 on june 8th and this is the first response i have gotten seeing as i ran into the issue on day 2 of ownership.
ill try to get all of the files emailed out this weekend. i ordered an uc100 to see if that works so ill be switching computers back out later on in the week (currently running linux desktop). i believe i already sent you guys the debug files also. do you have a return policy because i have to have a probe and this absolutely does not work. do you guys have any idea when an update will be available? i purchased the 411 on june 8th and this is the first response i have gotten seeing as i ran into the issue on day 2 of ownership.
5
Parallel Port breakout boards, motherboards, and dedicated accessories / PMDX: No synchronized position from motion planner
« on: June 18, 2020, 08:14:38 PM »
hey guys, so i am running into a huge issue. i am using a windows 10 laptop with mach 4 (build 4300) and a pmdx 411 (Ver 0.53.263 plug in and ive tried the previous 4) i am attempting to use it with a cnc plasma cutter however about every 3rd ish probe it gives me a error "PMDX: No synchronized position from motion planner" and disable the machine, using a g31 code. if it try and allow mach4 plasma to handle the probe cycle with a m03 command i get a "mach 4 macro alarm 3 merror_not_now" i have tried adjusting the buffer settings and if i turn the g code buffer all the way down (to 100ms) it seems to have the best luck but it is just random. the plasma is off for all of this so it is not an electrical noise problem. i have uninstalled everything and re installed it about 7 times. i am in contact with mach support but no great ideas from them so far. the machiene runs fine with my linux computer. Im super bummed i just blew 300 bucks and a week of work to have it still running linuxcnc. sometimes mach4 will just stop (but not disable itself) also but that issue is on the back burner for now. i have emailed pmdx but not gotten any response in a week.
6
SmartBOB controllers and dedicated accessories / Re: No synchronized position from motion planner
« on: June 14, 2020, 02:29:17 PM »
hello, did you ever figure out what was causing this? i am having the exact problem and using the same hardware. any advice would be much appreicated.
thank you,
James
thank you,
James
Pages: [1]