Author Topic: PMDX-340 Drivers  (Read 4247 times)

HDVideo

  • Posts: 3
    • View Profile
PMDX-340 Drivers
« on: January 04, 2016, 05:37:51 PM »
Does the PMDX-340 use one of your breakout board products? What about the drivers? Basically, what's in the box?

Thanks,
Ed

Steve Stallings

  • Administrator
  • Posts: 527
  • www.PMDX.com/Images/Avatar120.jpg
    • View Profile
Re: PMDX-340 Drivers
« Reply #1 on: January 04, 2016, 10:06:23 PM »
The box contains one large PCB with all the electronics including power supply,
drivers, and breakout/interface functions. Other than that, a transformer, power
connectors, a fan, and the E-Stop switch. Internal wiring is minimized as much as
possible.

The motor drivers are short circuit and disconnect/reconnect protected even under
power, so replaceable driver modules are not needed.

If you want to use Mach4 and USB, the PMDX-411 will plug directly on the back of
the PMDX-340.

Steve Stallings
www.PMDX.com