Mach4 build 2259 released - oops

[Steve Stallings]

Build 2259 should not be used, please use build 2270 instead.

(obsolete comment, see above).... OK, the motion data interface in the Mach4 API still has issues, please drop back to 2238 or 2247 if you need to make real parts....

===========================================================

Build 2259 of Mach4Hobby can be downloaded here:

http://www.machsupport.com/wp-content/uploads/2014/04/Mach4Hobby%20Installer-2259.exe

.... or here:

http://www.pmdx.com/Downloads_Mach4/Mach4_Hobby_Releases/Mach4Hobby%20Installer-2259.exe

This build runs with PMDX SmartBOB USB plug-in version 0.17.86 or newer. Plug-ins can be downloaded here:

http://www.pmdx.com/PMDX-SmartBOB-USB-Plug-In

Build 2259 includes the following changes that will impact the user experience:

1) Fixes bug in the motion data in API that slipped in when Screw Mapping was introduced in build 2251. This bug prevented motion data from being seen by the SmartBOB plug-in.

Mach4Hobby is evolving rapidly, so be sure to check that your plugin is compatible with the version of Mach4Hobby that you are running.

Steve Stallings