The Mach4Hobby plugin for the SmartBOB-USB family of controllers has been
updated. Final update for use with Mach4 build 2270.
(1) Updated homing parameters related to how far to move onto and off of
the homing switch to accommodate machines with large values of "steps per".
See "Homing Features and Restrictions" in the release notes for more
information.
(2) The SmartBOB plug-in configuration dialog now shows the current motor
step and direction pin assignments on the "Motor Config" tab in the
"Step/Dir Configuration" section.
(3) Fixed race condition in homing code that sometimes displayed error
messages when there were no errors.
(4) Fixed limit switch handling
(5) Fixed limit override handling
Full details HERE:
http://www.pmdx.com/Downloads_/ReleaseNotes_Ver_0_22_106.htmlThis updated plug-in can be downloaded HERE:
http://www.pmdx.com/PMDX-SmartBOB-USB-Plug-In
